Note: The pictures in this guide show the Asus Eee PC 901. Page 2 Asus Eee PC SSD Installation Guide Over Step 3: Install the SSD - Insert the SSD into the empty mini PCIe slot. - Replace the two drive screws from Step 2. Step 4: Replace Drive Panel - Place the panel over the SSD. If the screen is not showing any signs of display when using the flash light, or when the screen is not showing any text when you turn the eee pc on BEFORE Windows loads, this means that the LCD of the netbook or the Asus Eee PC is dead or faulty. Two things to look at here: the LCD or the backlit inverter. 1) Type devmgmt.msc in the field and click OK. 2) Double-click Imaging devices or Camera to expand the category. 3) Right-click Integrated Camera and select Uninstall device. 4) Click OK to confirm. Restart your computer and the camera driver should be reinstalled automatically. STEP 7. Remove the left hinge cover. STEP 8. Carefully separate the LCD from the display cover and remove two screws on the right side. These screws securing the LCD to the mounting brackets. STEP 9. Remove two more screws on the left side of the left bracket. NOTE: the bottom screws located under a small magnet. With a much more reasonable 1,024x600 resolution (the 7-inch screen was a paltry 800x480), the new Eee PC 900 feels more like a laptop and less like a portable Internet appliance. While the RAM If a three-prong plug is provided, you must use a grounded AC outlet or use a properly grounded adapter to ensure safe operation of the Eee PC. ASUS Eee PC Page 12 3. Open the display panel 4. Turn ON the Eee PC When you open the display panel, do not force it down to the table or else the hinges may break! Never lift the Eee PC by the Place the motherboard outside the case on a piece of cardboard Install the CPU/heatsink, memory, and video card. There's no need for a hard drive at this point. See if the board posts at all The reset button is not provided on Eee PC 4G Surf model. ASUS Eee PC until the system shuts Page 28: Touchpad Usage Touchpad Usage Clicking/Tapping - With the cursor over an item, press the left button or use your fingertip to touch the touchpad lightly, keeping your finger on the touchpad until the item is selected. How to Restore an ASUS Eee PC to Factory Settings Turn off the Eee PC. Turn the unit on and press the “F9” when the flash (logo) screen appears. Select the “Restore Factory Settings” option from the bottom of the list in the menu and type “Yes” when prompted to verify the reset. the asus eee pc is a netbook computer line from asus, and part of the asus eee product family. Asus eee pc 1001pxd touchpad pc series with windows xp edition. Is the Eee PC x101ch compatible with Windows 10? Hi, I installed Windows 10 on Asus Eee PC X101CH netbook. Everything works fine, since 10 is not supported I installed all drivers for pFoecq.